Accu-Cut :: HOME
Accu-Cut :: X-77
Accu-Cut :: X-33
Accu-Cut :: Q-9
Accu-Cut :: Q-7
Accu-Cut :: j-5
Accu-Cut :: j-2
Accu-Cut :: Feed Table
Accu-Cut :: Pre-Owned Units
Accu-Cut :: Media / Videos
Accu-Cut :: Compare New Products
FACEBOOK BLOG YOUTUBE
FACEBOOK BLOG YOUTUBE
  • DO MORE IN LESS TIME
  • CUT IN A SMALLER AREA
  • INSPECT MATERIAL
  • HAPPIER EMPLOYEES
  • REDUCE INJURIES
  • ATTRACT BETTER CREWS
  • ALWAYS SHOWS UP
  • NEVER CALLS IN SICK
  • REDUCE OVERCUTTING
  • KEEP MATERIAL CLEAN
  • MEASURE ROLLS
  • CUT SAMPLE STRIPS
  • CUT CARPET COVE BASE
  • SPLIT ROLLS IN HALF
  • BACKROLL REMNANTS
  • KEEP BETTER INVENTORY
Parts and Service Department

Before the sun has a chance to rise and before some of us even have our eyes open Crescent Services has already been hard at work. Crescent services is in the building next door to Accu-Cut here in Tavares Florida and handle the parts and service for all of the Accu-Cut machines out there in the field. We have to admire the crew that works out in the warehouse, if you could ever see how much time and the extreme amount hard work they put in to make sure your machine is top notch we think you would be very impressed.

Parts and Service Department
divider-image
 
Accu-Cut :: Carpet Cutting Machines
HOME   |   FINANCING  |  LITERATURE  |  ABOUT US  |  WHAT'S NEW  |  LINKS  |  CONTACT US

 

Accu-Cut announces integration of cutting machine and flooring software

(Tavares, Florida - August 1, 2003) Accu-Cut is now offering a software program that allows floor covering dealers to achieve complete control over their inventory.

The Accu-Cut Inventory Control Software Link, which operates on a personal computer connected to an Accu-Cut cutting machine, provides a link between the Accu-Cut machine and a company's floor covering software program. The link enables dealers to track inventory as material enters and leaves their warehouse by automatically transferring data generated from the cutting machine to the inventory module of their flooring software. The Accu-Cut Inventory Control Software Link is currently compatible with Roll Master, RFMS and CRW Flooring software.

"No more cutting wrong goods, no more cutting those extra inches and being short three feet on every roll, no more hand writing a tag for the cut to go to the customer or the installer. The benefits go on and on," commented Dev O'Reilly, President of Textile Management Systems, Inc. the developer of Roll Master.

"The Accu-Cut Inventory Control Software Link maximizes the capabilities of an Accu-Cut machine further increasing the time savings and money savings realized by employing an Accu-Cut machine," said Scott Brockie, CEO of Accu-Cut.

Terry Wheat, President of RFMS, adds, "The linkage between RFMS and Accu-Cut removes one of the last gaps in the order procurement, fulfillment, staging and installation process. Even with integrated software controlling the amount of product ordered and verifying its receipt, there was still the possibility of the warehouse technician transposing the amount to cut when he received the picking ticket. If 42 feet instead of 24 feet leave the warehouse (or vice versa) the dealer has a problem. This enhancement eliminates that challenge and ensures the proper staging and timely delivery of the right materials to the job site. Controlling inventory shrinkage and maximizing installation efficiency are the net result."

The Inventory Control Software Link includes the following features and benefits:

Electronically transfers cuts to be made directly to the Accu-Cut machine. Cuts to be made are exported from the inventory module of the flooring software to the Inventory Control Software Link eliminating hand written cut sheets, reducing keystroke errors and saving time.

Barcode scan prevents making cuts on the wrong material. The machine operator must first scan the roll tag prior to making a cut. If the programmed cut does not match the roll being scanned an error message will be displayed.

Prints detailed barcode cut labels and roll labels. The labels can be customized to best suit each dealers individual needs. An updated roll label containing the current roll balance can be printed at any time.

Automatically updates inventory in flooring software. Inventory in the flooring software is adjusted as soon as a cut is made on the Accu-Cut machine. Roll balances can be taken when a roll is received and any discrepancies in the length logged in the Inventory Control Software Link.

Provides detailed inventory activity reports. Numerous reports are available showing the cuts made to a specific roll, during date ranges and shortages. Customized reports are available.

Integration with other software programs is scheduled to occur in the near future. The software link can be used on most Accu-Cut models.

Founded in 1990, Accu-Cut is the largest supplier of floor covering cutting equipment in North America. Accu-Cut's corporate offices and equipment showroom are located in Tavares Florida.

Statement issued by Accu-Cut, August 1, 2003.

Contacts: Accu-Cut
Nick August, Marketing Coordinator
800-ACCU-CUT x224
nick@accu-cut.com

RFMS
Tracy Ward, V.P. Sales & Marketing
800-701-7367 x3211
tward@rfms.com



Textile Management Systems - Roll Master
Dev O'Reily, President
504-241-4100 x101
dev@rmaster.com


CRW Flooring
Chris Woods, President
866-858-8812
cwoods@crwflooring.com

 



For sales: Call 1-800-ACCU-CUT (222-8288) or email: info@accu-cut.com Outside the U.S. & Canada: Call 352-742-0902.
HOME  |  FINANCING  |  LITERATURE  |  ABOUT US  |  WHAT'S NEW  |  LINKS  |  CONTACT US

Accu-Cut.com - Privacy Policy - Sitemap